G Targets
G-125
G-250
G-253
G Targets are designed with an extended base to aid in removal after the test cycle. The Black KAPTON® allows the reflector to be picked up by providing its own contrast and not relying on the substrate (great for testing white objects). The ,STRONG>G Series uses a .001″ SILICONE pressure sensitive adhesive (psa). The thinner adhesive layer reduces the adhesion level attained, enabling easier removal.
This series should withstand a thermal cycle of ±300°F.
G-125
G-250
G-253
GA Targets have the same structure as the G series , but the A denotes a .001″ ACRYLIC psa. The thinner adhesive layer reduces the adhesion level attained, enabling easier removal. GA Targets should work within a ±300°F thermal cycle as well as pass the NASA out gassing test.
Choose your own spacing per roll.
Both the G and GA targets can be pre-spaced in rolls of 1000 with a spacing of your choosing. The targets are applied in strips. The carrier liner is burnished to adhere the targets to the substrate, then the carrier liner can be removed (with a low angle of peel). Leaving the targets pre-spaced on the structure.
Retroreflector sizes are available from 3/16″ through 1″.
Metric retroreflector sizes are available from 3 mm through 25 mm.
Custom retroreflector size varitations are available within the G and GA series. To designate the retroreflective material that allows the target to function at 500°F add an “H” (i.e. G becomes GH and GA becomes GAH).
Questions? Ready to Order? Contact Us!