J Targets





J Targets have a KAPTON® backing and are designed to be easier to remove because of the .001″ SILICONE pressure sensitive adhesive ( psa ).  This series has the ability to withstand a ±300°F thermal cycle.




JA Targets offer an ACRYLIC pressure sensitive adhesive .001″ thick that has the ability to pass the NASA out gassing test.  This series offers easier removal after the thermal cyle of ±300°F.

Both the J and JA series targets can be pre-spaced in rolls of 1000, with a spacing of your choice.  The targets are applied in strips.  The carrier liner is burnished to adhere the targets to the substrate, then the carrier liner is removed (with a low angle of peel) leaving the targets pre-spaced on the structure.
Retroreflectors are available from 3/16″ through 1″ in size.
Metric retroreflectors are available from 3 mm through 25 mm.
Custom retroreflectors are available within the J and JA series.
To designate the retroreflective material that allows the target to function at 500°F add an “H” (i.e. J becomes JH and JA becomes JAH).
Questions? Ready to Order? Contact Us!