C Targets

 

 

ccaiia250
C-250

ccaiia253
C-253 

C Targets are designed with an extended base to aid in removal after the test cycle.  The materials are KAPTON® film with a .002″ SILICONE pressure sensitive adhesive psa.  This series has been used successfully in thermal cycles of ±300°F. 

 

ccaiia250
CA-250

ccaiia253
CA-253

CA Targets have the same KAPTON® base material as the C series, but the A denotes a .002″ACRYLIC psa.  The CA targets have also been used for thermal cycles of ±300°F.  The advantage in the acrylic psa is that it passes the NASA out gassing test. The ACRYLIC PSA we use is listed on the NASA Data for accepted out gassing Adhesives.

 

spacedrectangle
Choose your own spacing per roll.

 

Both the C and CA targets can be pre-spaced in rolls of 1000 with spacing of your choosing.  The targets can then be applied in strips.  The carrier liner is burnished to adhere the targets to the substrate, then the liner can be removed ( at a low angle of peel ) leaving the targets pre-spaced on the structure.
 
 
 
Retroreflector sizes are available from 3/16″ through 1″.
Metric retroreflector sizes are available from 3 mm through 25 mm.
Custom retroreflector size variations are available within the C or CA series.
To designate the retroreflective material that allows the target to function at 500°F add an “H” (i.e. C becomes CH and CA becomes CAH).
 
Questions? Interested in ordering?  Contact Us To Learn More!